English
Türkçe
Pressure Reduction Control Valve
Control Valve Function:
In a valve where the entry pressure is too high, flow rate is adjusted to a lower level without having to take into account the fluctuations. Akkon 220 series pressure reducing control valve’s main functionis to stabilize the pressure at the exit of the valve. The pipe diameter is not considered when selecting a valve.; flow and pressure drop (the cavitation chart effected by entry and exit pressure) is considered..
Control Valve Additional Function:
AKKON 223 Series Pressure Reducer /Pressure Stabilizer Valves :
☆
It is possible to avoid drops in pressure at the opening of our Akkon 220 Series Pressure Reducer by adding a minimum pressure stabilizing function.
Pressure Reduction Control Valve Pilot Control Circuit:
☆ The pilot circuit works efficiently for extended periods due to a fully otomatic self cleaning ½” filter
☆ The fittings in the control circuit are ½” automatic filter, ½” global valve, ¼” needle valve, as the pilot 2/2 multiport pressure control valve , manometer typ with glycerine, 3/8″ copper pipe and pounded brass pipe fittings.
☆ The pilot valve, made with pounded brass, has rustproof interior components.
Application
Pressure Reduction Control Valve Technical Details:
☆ 60º slanted half linear flow body suitable for attaching to a diaphragm type actuator.
☆ Body encompassing changeable bronze bushing.
☆ Single control type actuator.
☆ Diafphragm; polyamide court fabric knitted double layered neoprene rubber.
☆ The diapragm’s life has been extended indefinitely by passing it and the flap attached to it through a shaft to the upper lid which is housed in bronze bushing.
☆ The inner spring is centered from the exterior to the upper lid and flap, and attached to the upper control reservoir.
☆ The wear resistant, rectangularly designed flap rubber is attached to a changeable flap.
☆ All control valve parts can be replaced easily without having to detach the valve body from the fixture.
☆ All valves are coated with wear resistant, kiln fired electrostatic EPOXY coating.
☆ All valves are submitted to hydrostatic and function tests.
☆ All control valves are protected against production and labor errors with a 2 year guarantee.
Fixture Assembly Details:
Single Stage Reducing Bypassed Modulation Application
Advise accordance with our Flow Pressure Reducing Valve Diameter
